Table of Contents
Advertisement
FC Management MIB
B
connUnitPortStatCountPBSYFrames
connUnitPortStatCountFRJTFrames
connUnitPortStatCountPRJTFrames
E/OS SNMP Support Manual
B-56
Description
Count of times that FBSY was returned to this port as a result of a
frame that could not be delivered to the other end of the link. This
occurs if either the Fabric or the destination port is temporarily busy.
Port can only occur on SOFc1 frames (the frames that establish a
connection). Note, this is a Fibre Channel only stat. This is the sum of
all classes. If you cannot keep the by class counters, then keep the
sum counters.
Sequence
::= { connUnitPortStatEntry 10 }
Syntax
OCTET STRING (SIZE (8))
Access
read-only
Status
mandatory
Description
Count of times that PBSY was returned to this port as a result of a
frame that could not be delivered to the other end of the link. This
occurs if the destination port is temporarily busy. PBSY can only
occur on SOFc1 frames (the frames that establish a connection). Note,
this is a Fibre Channel only stat.This is the sum of all classes. If you
cannot keep the by class counters, then keep the sum counters.
Sequence
::= { connUnitPortStatEntry 11 }
Syntax
OCTET STRING (SIZE (8))
Access
read-only
Status
mandatory
Description
Count of times that FRJT was returned to this port as a result of a
Frame that was rejected by the fabric. Note, This is the total for all
classes and is a Fibre Channel only stat.
Sequence
::= { connUnitPortStatEntry 12 }
Syntax
OCTET STRING (SIZE (8))
Access
read-only
Status
mandatory
Advertisement
Table of Contents
