McDATA StorageWorks 64 - SAN Director Switch Manual page 57

ipRouteType
Type
Access
Description
ipRouteProto
Type
Access
Description
INTEGER
RW
The type of route. Note that the values direct(3) and indirect(4) refer
to the notion of direct and indirect routing in the IP architecture.
Setting this object to the value invalid(2) has the effect of invalidating
the corresponding entry in the ipRouteTable object. That is, it
effectively disassociates the destination identified with said entry
from the route identified with said entry. It is an implementation-
specific matter as to whether the agent removes an invalidated entry
from the table. Accordingly, management stations must be prepared
to receive tabular information that corresponds to entries not
currently in use. Proper interpretation of such entries requires
examination of the relevant ipRouteType object.
Values:
other(1), none of the following
invalid(2), an invalidated route
direct(3), route to directly connected (sub-)network
indirect(4) route to a non-localhost/network/sub-network
INTEGER
R
The routing mechanism via which this route was learned. Inclusion
of values for gateway routing protocols is not intended to imply that
hosts should support those protocols.
other(1) none of the following
local(2) -protocol information, e.g., manually configured entries
netmgmt(3) set via a network management protocol
icmp(4) e.g., obtained via ICMP, Redirect
The remaining values are all gateway routing protocols:
egp(5),
ggp(6),
McDATA SNMP Support
MIB Definitions: MIB-II
2
2-39