Groups In Mib Ii; System Group - McDATA StorageWorks 64 - SAN Director Switch Manual

MIB II
E
Groups in MIB-II

System group

sysDescr
E/OS SNMP Support Manual
E-2
PhysAddress ::= OCTET STRING
This data type is used to model media addresses. For many types of
media, this will be in a binary representation. For example, an
ethernet address would be represented as a string of 6 octets.
system
interfaces
at
ip
icmp
tcp
udp
egp
Historical (some say hysterical)
cmot
transmission OBJECT IDENTIFIER ::= { mib-2 10 }
snmp
Implementation of the System group is mandatory for all systems. If
an agent is not configured to have a value for any of these variables, a
string of length 0 is returned.
Syntax
DisplayString (SIZE (0..255))
Access
read-only
Status
mandatory
Description
A textual description of the entity. This value should include the full
name and version identification of the system's hardware type,
software operating-system, and networking software. It is
mandatory that this only contain printable ASCII characters.
Sequence
::= { system 1 }
OBJECT IDENTIFIER
OBJECT IDENTIFIER
OBJECT IDENTIFIER
OBJECT IDENTIFIER
OBJECT IDENTIFIER
OBJECT IDENTIFIER
OBJECT IDENTIFIER
OBJECT IDENTIFIER
OBJECT IDENTIFIER ::= { mib-2 9 }
OBJECT IDENTIFIER ::= { mib-2 11 }
::= { mib-2 1 }
::= { mib-2 2 }
::= { mib-2 3 }
::= { mib-2 4 }
::= { mib-2 5 }
::= { mib-2 6 }
::= { mib-2 7 }
::= { mib-2 8 }