McDATA StorageWorks 64 - SAN Director Switch Manual page 141

*fcConnUnitLinkIndex
Type
Product Mapping
Access
Description
FcConnUnitLinkNodeIdX
Type
Product Mapping
Access
Description
FcConnUnitLinkPortNumberX
Type
Product Mapping
Access
Description
NOTE: (for E/OS firmware): A reset or firmware load will cause this table to
be regenerated from the persistent login database – table indices will most
likely be associated with different entries after the reset.
Unsigned32
A link index.
R
This value is used to create a unique value for each entry in the link
table with the same
fcConnUnitId
is not currently in use and the value is the next candidate to be used.
This value is allowed to wrap at the highest value represented by the
number of bits. This value is reset to zero when the system is reset
and the first value to be used is 1.
OCTET STRING (SIZE(16))
The WWN of the local fcConnUnit is returned. This information is
available for both E and F ports
R
The node WWN of the unit at one end of the link. If the node WWN is
unknown and the node is a
the value of this object MUST BE equal to its
Integer32
The fcConnUnit's local port number is returned. This information is
available for both E and F ports.
R
The port number on the unit specified by fcConnUnitLinkNodeIdX if
known, otherwise –1. If the value is non-negative then it will be equal
to fcConnUnitPortPhysicalNumber.
. The value can only be reused if it
in the responding agent then
fcConnUnit
fcConnUnitId
Fibre Alliance MIB
McDATA SNMP Support
.
2-123
2