McDATA StorageWorks 64 - SAN Director Switch Manual page 399

Hide thumbs Also See for StorageWorks 64 - SAN Director Switch:

Table of Contents

ifPhysAddress

ifAdminStatus

The size of the largest datagram which can be sent/received on the

interface, specified in octets. For interfaces that are used for

transmitting network datagrams, this is the size of the largest

network datagram that can be sent on the interface.

::= { ifEntry 4 }

An estimate of the interface's current bandwidth in bits per second.

For interfaces which do not vary in bandwidth or for those where no

accurate estimation can be made, this object should contain the

nominal bandwidth.

::= { ifEntry 5 }

The interface's address at the protocol layer immediately `below' the

network layer in the protocol stack. For interfaces which do not have

such an address (e.g., a serial line), this object should contain an octet

string of zero length.

::= { ifEntry 6 }

-- ready to pass packets

testing(3) -- in some test mode }

Groups in MIB II