Table of Contents
Advertisement
McDATA SNMP Support
2
ifMtu
ifSpeed
ifPhysAddress
ifAdminStatus
E/OS SNMP Support Manual
2-26
Type
INTEGER
Access
R
Description
The size of the largest datagram which can be sent/received on the
interface, specified in octets. For interfaces that are used for
transmitting network datagrams, this is the size of the largest
network datagram that can be sent on the interface.
Type
Gauge
Access
R
Description
An estimate of the interface's current bandwidth in bits per second.
For interfaces which do not vary in bandwidth or for those where no
accurate estimation can be made, this object should contain the
nominal bandwidth.
Type
PhysAddress
Access
R
Description
The interface's address at the protocol layer immediately `below' the
network layer in the protocol stack. For interfaces which do not have
such an address (e.g., a serial line), this object should contain an octet
string of zero length.
Type
INTEGER
Access
RW
Description
The desired state of the interface. The testing(3) state indicates that no
operational packets can be passed.
Advertisement
Table of Contents
