McDATA StorageWorks 64 - SAN Director Switch Manual page 213

Hide thumbs Also See for StorageWorks 64 - SAN Director Switch:

Table of Contents

fcConnUnitPortStatTxElements

fcConnUnitPortStatRxElements

fcConnUnitPortStatBBCreditZero

EOF. FC loop devices should not count frames passed through. This

value represents the sum total for all other Rx objects.

::= { fcConnUnitPortStatEntry 4 }

The number of octets or bytes that have been transmitted by this port.

One second periodic polling of the port. This value is saved and

compared with the next polled value to compute net throughput.

Note, for Fibre Channel, ordered sets are not included in the count.

::= { fcConnUnitPortStatEntry 5 }

The number of octets or bytes that have been received by this port.

One second periodic polling of the port. This value is saved and

compared with the next polled value to compute net throughput.

Note, for Fibre Channel, ordered sets are not included in the count.

::= { fcConnUnitPortStatEntry 6 }

Count of transitions in/out of BBcredit zero state. The other side is

not providing any credit. Note, this is a Fibre Channel stat only.

::= { fcConnUnitPortStatEntry 7 }

Fibre Alliance MIB