Task 9: Configure Windows Operating System Users; Change Default Administrator Password; Add A New User - McDATA 316095-B21 - StorageWorks Edge Switch 2/24 Installation And Service Manual

Installation Tasks
2

Task 9: Configure Windows Operating System Users

Change Default
Administrator
Password

Add a New User

McDATA Sphereon 4500 Fabric Switch Installation and Service Manual
2-42
8. Close dialog boxes as appropriate and return to the The Network
and Dial-up Connections window.
9. Record the changed gateway and DNS server addresses for
reference if the server hard drive fails and must be restored.
10. To optionally configure addresses for the public LAN connection
(LAN 1), double-click the Local Area Connection 1 icon and repeat
step 2 through step
11. Close all dialog boxes and return to the Windows desktop.
12. Reboot the server and
Configure password access for all authorized Windows (server)
users. It is also recommended to change the default administrator
password. To configure users:
1. At the Windows desktop, click Start at the left side of the task bar
(bottom of the desktop), then sequentially select Settings, Control
Panel, and Users and Passwords. The Users and Passwords dialog
box displays.
2. The Guest user name is a built-in account in the Windows
operating system and cannot be deleted. The srvacc account is for
field service users and must not be modified or deleted.
To change the administrator password from the default (password) to
a customer-specified password:
1. At the Users and Passwords dialog box, click Set Password. The Set
Password dialog box displays.
2. At the New Password and Confirm New Password fields, type the
new password. Both fields are case-sensitive.
3. Click OK. The default administrator password changes and the
Set Password dialog box closes.
To set up a new Windows user:
1. At the Users and Passwords dialog box, click Add. The first window
of the Add New User wizard displays
9.
Access the Management Server
(Figure
Desktop.
2-19).