Connecting The Antenna Terminals - Denon AVR-3801 Operating Instructions Manual

Connecting the antenna terminals

75 Ω/ohms
COAXIAL
CABLE
FM ANTENNA
ADAPTER
(Supplied)
FM INDOOR
ANTENNA
(Supplied)
• An F-type FM antenna cable plug can be connected directly.
• If the FM antenna cable's plug is not of the F-type, connect using the included antenna adapter.
AM loop antenna assembly
Remove the vinyl tie
and take out the
connection line.
a. With the antenna
on top any stable
surface.
Mount
b. With the antenna
attached to a wall.
Installation hole
Mount on wall, etc.
DIRECTION OF
BROADCASTING
STATION
FM ANTENNA
300 Ω/ohms
FEEDER
CABLE
300 Ω/ohms
Connect to the AM
antenna terminals.
Bend in the reverse
direction.
GROUND
FM antenna adopter assembly
Open the cover
PULL
CLAMP
PULL
ANTENNA ADAPTER
REMOVE
CLAMP
Connection of AM antennas
1. Push the lever. 2. Insert the conductor. 3. Return the lever.
Note to CATV system installer:
This reminder is provided to call the CATV system installer's
attention to Article 820-40 of the NEC which provides guidelines
for proper grounding and, in particular, specifies that the cable
ground shall be connected to the grounding system of the
building, as close to the point of cable entry as practical.
Notes:
• Do not connect two FM antennas simultaneously.
• Even if an external AM antenna is used, do not disconnect the
AM loop antenna.
• Make sure AM loop antenna lead terminals do not touch metal
parts of the panel.
AM LOOP
ANTENNA
(Supplied)
AM OUTDOOR
ANTENNA
75 Ω/ohms COAXIAL CABLE
SHUT
CLAMP
SHUT
CLAMP
9