Denon AVR-3801 Operating Instructions Manual page 39

4 Use the D and H cursor buttons to display "RESET PRE" on
the remote control unit, then press the ENTER button.
• After "SEL PRE" is displayed on the remote control unit's
display, the registered preset memory is displayed on the
remote control unit's display.
TUNING
BAND MODE
TUNING
5
TUNING
BAND MODE
TUNING
(3) Resetting "learned" buttons
1 Press the power ON/SOURCE button and the OFF button at
the same time.
• "SET UP" appears on the remote control unit's display.
OFF
2 Press the ENTER button.
3 Use the D and H cursor buttons to display "RESET" on the
remote control unit's display, then press the ENTER button.
• "RESET PRE" is displayed.
TUNING
BAND MODE
TUNING
4 Use the D and H cursor buttons to display "RESET LRN" on
the remote control unit's display, then press the ENTER
button.
• "SEL MODE" is displayed, then "TV" appears.
TUNING
BAND MODE
TUNING
5 Use the D and H cursor buttons to select the mode of the
button to be reset, then press the ENTER button.
TUNING
BAND MODE
TUNING
38
ENTER
SHIFT
Use the D and H cursor buttons to
select the code to be reset.
ON /
SOURCE
ENTER
SHIFT
ENTER
SHIFT
ENTER
SHIFT
ENTER
SHIFT
6 When the mode you want to reset is shown on the remote
control unit's display, press the ENTER button to reset the
preset memory.
7 "CONFIRM" is displayed. To reset the preset memory, press
the ENTER button while "CONFIRM" is displayed.
• "COMPLETE" appears on the remote control unit's display.
1
3, 4, 5
2, 3, 4, 5, 6
6 "CONFIRM" is displayed. To reset the "learned" button for
the selected mode, press the ENTER button while
"CONFIRM" is displayed.
ENTER
SHIFT
ENTER
SHIFT
POWER
ON /
OFF
SOURCE
RC-883
REMOTE CONTROL UNIT
TV CD CDR/MD/ TAPE RECEIVER
VCR DBS/CABLE VDP DVD
DISPLAY MENU
SURR.
OSD
PARA.
SETUP RETURN
TUNING
A/B
MEMORY
BAND MODE
CHANNEL VOLUME
TUNING
+
+
SKIP ENTER
-
-
SHIFT
SKIP
MUTING
TUNER PHONO CD
1 2 3
CDR/TAPE VDP DVD
4 5 6
VCR-1 VCR-2/V.AUX TV/DBS
7 8 9
TV/
0 +10
VCR
TEST
SPEAKER OUTPUT
TONE
SURROUND
DOLBY/DTS DSP 5CH / 7CH
SURROUND SIMU. STEREO
6.1 / 7.1
STEREO
DIRECT
SURROUND
INPUT
MODE ANALOG EXT.IN
SYSTEM CALL
CALL 1 CALL 2 BACKLIGHT
ENTER
SHIFT