Denon AVR-3801 Operating Instructions Manual page 51

Fader function
• This function makes it possible to lower the volume of the front channels (FL, C and FR) or the rear channels (SL, SR, SBL and SBR) together.
Use it for example to adjust the balance of the sound from the different positions when playing multi-channel music sources.
1 Select "FADER".
CH.VOL
(Main unit)
The channel switches in the order shown below each time
this button is pressed.
FL C
FADER
2
Press the D button to reduce the volume of the front
channels, the H button to reduce the volume of the rear
channels.
The fader function does not affect the SW channel.
SELECT
(Main unit)
The channel whose channel level is adjusted lowest can be faded
to –12 dB using the fader function.
If the channel levels are adjusted separately after adjusting the
fader, the fader adjustment values are cleared, so adjust the fader
again.
When EXT. IN is selected, the SW, SBL and SBR channel faders do
not function.
Dolby Surround Pro Logic mode
1 Select the Dolby Surround Pro Logic mode.
• The Dolby Pro Logic indicator lights.
SURROUND
MODE
(Main unit)
2
Play a program source with the
• For operating instructions, refer to the manuals of the
respective components.
NOTE:
• There are four Dolby Surround Pro Logic modes (NORMAL,
PHANTOM, WIDE and 3CH. LOGIC). The AVR-3801 sets the
mode automatically according to the types of speakers set
during the system setup process (page 18).
50
ENTER
SHIFT
(Remote control unit)
FR SR SBR
SW SL
TUNING
BAND MODE
TUNING
(Remote control unit)
SELECT
DOLBY/DTS
SURROUND
(Remote control unit)
SBL
Light
mark.
SETUP RETURN
TUNING
A/B
2
MEMORY
BAND MODE
CHANNEL VOLUME
TUNING
+
+
SKIP ENTER
1
-
-
SHIFT
SKIP
MUTING
TUNER CD
PHONO
This is only displayed when setting the fader control.
TEST
SPEAKER OUTPUT
TONE
SURROUND
1
5CH / 7CH
DOLBY/DTS DSP
SURROUND SIMU. STEREO
6.1 / 7.1
STEREO
DIRECT
SURROUND