Denon AVR-3801 Operating Instructions Manual page 23

2
ENTER
SHIFT
3
TUNING
BAND MODE
TUNING
4 Once "Meters" or "Feet" is selected in step 3, the
Delay Time screen appears automatically.
5
TUNING
BAND MODE
TUNING
6
TUNING
BAND MODE
TUNING
22
Switch to the Delay Time screen.
Select the desired unit, meters or feet.
Select (darken) the desired units, "Meters" or "Feet".
Select the speaker to be set.
Set the distance between the
center speaker and listening
position.
The distance changes in units of 1
foot (0.1 meters) each time the
button is pressed. Select the value
closest to the measured distance.
If "Yes" is selected for "Default", the settings are automatically reset
to the default values.
Please note that the difference of distance for every speaker should be 15
ft (4.5 m) or less. If you set an invalid distance, a CAUTION notice, such as
screen right will appear. In this case, please relocate the blinking speaker(s)
so that its distance is no larger than the value shown in highlighted line.
Example: When the distance is set to 12 feet
for the center speaker
Example: When "Feet" is selected