Denon AVR-3801 Operating Instructions Manual page 38

4 Use the D and H cursor buttons to display "RESET SYS" on
the remote control unit, then press the ENTER button.
• "SYS SEL" appears on the remote control unit's display.
TUNING
BAND MODE
TUNING
The remote control unit's display switches as shown
below each time the D and H cursor buttons are pressed.
RESET PRE
RESET ALL
5
Press the D and H cursor buttons to select the system call
setting to be reset.
BAND
The remote control unit's display switches as shown
below each time the D and H cursor buttons are pressed.
SYS MODE
SYS CALL 2
(2) Resetting the preset memory
1 Press the power ON/SOURCE button and the OFF button at
the same time.
• "SET UP" appears on the remote control unit's display.
OFF
2 Press the ENTER button.
3 Use the D and H cursor buttons to display "RESET" on the
remote control unit, then press the ENTER button.
TUNING
BAND MODE
TUNING
ENTER
SHIFT
RESET LRN
RESET SYS
TUNING
MODE
TUNING
SYS CALL 1
ON /
SOURCE
ENTER
SHIFT
ENTER
SHIFT
q To reset CALL 1 or CALL 2, select "SYS CALL 1" or SYS
CALL 2", then press the ENTER button.
w To reset system call settings registered at other buttons,
select "SYS MODE", press the ENTER button, press the
mode button at which the button is registered, then press
the ENTER button again.
6 "CONFIRM" is displayed. To reset the setting, press the
ENTER button while "CONFIRM" is displayed.
• "SYS SEL" appears on the remote control unit's display.
1
3, 4, 5
2, 3, 4, 6, 7
ENTER
SHIFT
ENTER
SHIFT
ENTER
SHIFT
POWER
ON /
OFF
SOURCE
RC-883
REMOTE CONTROL UNIT
TV CD CDR/MD/ TAPE RECEIVER
VCR DBS/CABLE VDP DVD
DISPLAY MENU
SURR.
OSD
PARA.
SETUP RETURN
TUNING
A/B
MEMORY
BAND MODE
CHANNEL VOLUME
TUNING
+
+
SKIP ENTER
-
-
SHIFT
SKIP
MUTING
TUNER PHONO CD
1 2 3
CDR/TAPE VDP DVD
4 5 6
VCR-1 VCR-2/V.AUX TV/DBS
7 8 9
TV/ 0
+10
VCR
TEST
SPEAKER OUTPUT
TONE
SURROUND
DOLBY/DTS DSP 5CH / 7CH
SURROUND SIMU. STEREO
6.1 / 7.1
STEREO
DIRECT
SURROUND
INPUT
MODE ANALOG EXT.IN
SYSTEM CALL
CALL 1 CALL 2 BACKLIGHT
37