Denon AVR-3801 Operating Instructions Manual page 36

System call
The included remote control unit is equipped with a system call function allowing a series of remote control signals to be transmitted by pressing
a single button.
This function can be used for example to turn on the amplifier's power, select the input source, turn on the monitor TV's power, turn on the source
component's power and set the source to the play mode, all at the touch of a button.
(1) System call buttons
The buttons that can be used for the system call function are
shown on the diagram at the right.
System call signals can be stored at different buttons according to
the mode. System call signals can be stored at a maximum of 6
buttons other than the CALL 1 and CALL 2 buttons.
29 successive operations can be set at each of these buttons.
(2) Storing system call signals
1 Press the power ON/SOURCE button and the OFF button at
the same time. "SET UP" appears on the remote control
unit's display.
OFF
2 Press the ENTER button.
3
Use the D and H cursor buttons to display "SYS CALL" on the
remote control unit, then press the ENTER button.
•
Display "SYS MODE" on the remote control unit's display.
TUNING
BAND MODE
TUNING
4 When "SYS MODE" is displayed, the remote control unit's
display switches as shown below each time the D and H
cursor buttons are pressed.
TUNING
BAND MODE
TUNING
When "SYS CALL 1" or "SYS CALL 2" is selected, the
signals are stored at the SYSTEM CALL 1 and CALL 2 buttons
(green), regardless of the mode. When the enter button is
pressed, the button registering mode (step 6) is set.
To register at other buttons, select "SYS MODE" then press
the enter button.
• After "SEL MODE" is displayed on the remote control
unit's display, the mode last set is displayed.
ON /
SOURCE
ENTER
SHIFT
ENTER
SHIFT
SYS MODE SYS CALL 1
SYS CALL 2
POWER
ON /
OFF
SOURCE
RC-883
REMOTE CONTROL UNIT
TV CD CDR/MD/ TAPE RECEIVER
VCR DBS/CABLE VDP DVD
MENU
DISPLAY
SURR.
OSD
PARA.
SETUP RETURN
TUNING
A/B
MEMORY
BAND MODE
CHANNEL VOLUME
TUNING
+
+
SKIP ENTER
-
-
SHIFT
SKIP
MUTING
TUNER CD
PHONO
1 2 3
CDR/ TAPE VDP DVD
4 5 6
VCR-1 VCR-2 /V.AUX TV/DBS
7 8 9
TV/
0 +10
VCR
TEST
SPEAKER OUTPUT
TONE
SURROUND
DOLBY/DTS DSP 5CH / 7CH
SURROUND SIMU. STEREO
6.1 / 7.1
DIRECT STEREO
SURROUND
INPUT
MODE ANALOG EXT.IN
SYSTEM CALL
CALL 1 CALL 2
BACKLIGHT
1
OFF
RC-883
REMOTE CONTROL UNIT
TV CD CDR/MD/ TAPE RECEIVER
7
VCR DBS/CABLE VDP
DISPLAY MENU
SURR.
OSD
PARA.
SETUP
TUNING
3, 4, 5
BAND MODE
CHANNEL
TUNING
+
SKIP ENTER
2, 3, 5, 6, 8
-
SHIFT
SKIP
MUTING
TUNER PHONO
1 2
CDR/TAPE VDP
4 5
VCR-1 VCR-2/V.AUX
7 8
TV/ 0
VCR
TEST
SPEAKER
TONE
SURROUND
DOLBY/DTS 5CH / 7CH
DSP
SURROUND SIMU. STEREO
6.1 / 7.1
STEREO
DIRECT
SURROUND
INPUT
MODE ANALOG
SYSTEM CALL
CALL 1 CALL 2 BACKLIGHT
POWER
ON /
SOURCE
DVD
RETURN
A/B
MEMORY
VOLUME
+
-
CD
3
DVD
6
TV/DBS
9
+10
OUTPUT
EXT.IN
35