Connecting The Antenna Terminals - Denon AVR-3806S Operating Instructions Manual

Connecting Other Sources

Connecting the antenna terminals

An F-type FM antenna cable plug can be connected directly.
FM ANTENNA
DIRECTION OF
BROADCASTING
STATION
75 /ohms
COAXIAL
CABLE
FM INDOOR
ANTENNA
(Supplied)
GROUND
AM LOOP
ANTENNA
(Supplied)
AM OUTDOOR ANTENNA
2 AM loop antenna assembly
Connect to the AM
antenna terminals.
1 2
Remove the vinyl tie
Bend in the reverse
and take out the
direction.
connection line.
4
a. With the antenna
on top any stable
surface.
Mount
b. With the antenna
attached to a wall.
Installation hole Mount on wall, etc.
Note to CATV system installer:
This reminder is provided to call the CATV
system installer's attention to Article 820-40
of the NEC which provides guidelines for
proper grounding and, in particular, specifies
that the cable ground shall be connected to
the grounding system of the building, as
close to the point of cable entry as practical.
22
Connecting Other Sources
Connection of AM antennas
3
1. Push the lever.
2. Insert the conductor.
3. Return the lever.
NOTE:
• Do not connect two FM antennas
simultaneously.
• Even if an external AM antenna is used, do
not disconnect the AM loop antenna.
• Make sure the AM loop antenna lead
terminals do not touch metal parts of the
panel.