Denon AVR-3801 Operating Instructions Manual page 27

Multi Vol. Level
Set the multi pre-out output level adjustment.
1
TUNING
BAND MODE
TUNING
2
TUNING
BAND MODE
TUNING
3
ENTER
SHIFT
Setting the on-screen display (OSD)
• Use this to turn the on-screen display (messages other than the menu screens) on or off.
1
TUNING
BAND MODE
TUNING
2
ENTER
SHIFT
3
TUNING
BAND MODE
TUNING
26
At the "System Setup Menu" screen, select "Multi
ENTER
Vol. Level" and press the ENTER button.
SHIFT
Select the desired settimg.
0 dB, -40 dB:
The output level is fixed at the set level and the volume can no longer be
adjusted.
Variable:
The level can be adjusted freely using the buttons on the remote control
unit.
Enter the setting.
The "System Setup Menu" reappears.
At the System Setup Menu select "On Screen Display".
Switch to the On Screen Display screen.
Select "ON" or "OFF".