Tone Control Setting - Denon AVR-3801 Operating Instructions Manual

Tone control setting

• Use the tone control setting to adjust the bass and treble as desired.
• To operate the tone control from the remote control unit.
1
SURR.
PARA.
(Remote control unit)
2
TUNING
BAND MODE
TUNING
(Remote control unit)
3
ENTER
SHIFT
(Remote control unit)
4
TUNING
BAND MODE
TUNING
(Remote control unit)
5
ENTER
SHIFT
(Remote control unit)
6
SURR.
PARA.
(Remote control unit)
• To operate the tone control from the main unit.
1
TONE
CONTROL
(Main ulnit)
2
SELECT
(Main ulnit)
56
Display the surround parameter
screen on the monitor.
The screen for the selected
surround mode appears.
"TONE" cannot be selected
in the Direct mode.
Select "TONE".
Switch to the Tone Control
screen.
To select Bass or Treble.
Enter the setting.
The surround menu screen re-appears.
To end the setting mode, press the surround parameter button again.
The tone switches as follows each time the TONE CONTROL button is pressed.
BASS TREBLE
0 1
With the name of the volume to be adjusted selected, turn the SELECT knob to adjust the level.
• To increase the bass or treble:
Turn the control clockwise. (The bass or treble sound can be increased to up to +12 dB in steps of 2 dB.)
• To decrease the bass or treble:
Turn the control clockwise. (The bass or treble sound can be decreased up to –12 dB in steps of 2 dB.)
To set the level.
TUNING
BAND MODE
TUNING
(Remote control unit)
POWER
ON /
OFF
SOURCE
RC-883
REMOTE CONTROL UNIT
TV CD CDR/MD/ TAPE RECEIVER
VCR DBS/CABLE VDP DVD
DISPLAY MENU
1, 6
SURR.
OSD
PARA.
SETUP RETURN
TUNING
A/B
4
MEMORY
BAND MODE
CHANNEL VOLUME
TUNING
+
+
SKIP ENTER
3, 5
-
-
SHIFT
SKIP
MUTING
TUNER PHONO CD
1 2 3
CDR/ TAPE VDP DVD
4 5 6
VCR-1 VCR-2 /V.AUX
TV/DBS
7 8 9
TV/
0 +10
VCR