Denon AVR-3801 Operating Instructions Manual page 45

After starting playback
[1] Adjusting the sound quality (TONE)
The tone control function will not work in the direct mode.
1 The tone switches as follows each time the TONE CONTROL
button is pressed.
TONE
CONTROL
(Main unit)
2 With the name of the volume to be
adjusted selected, turn the SELECT
knob to adjust the level.
• To increase the bass or treble: Turn the control clockwise.
(The bass or treble sound can be increased to up to +12 dB
in steps of 2 dB.)
• To decrease the bass or treble: Turn the control clockwise.
(The bass or treble sound can be decreased to up to –12 dB
in steps of 2 dB.)
[2] Listening over headphones
1 Connect the headphones to the
PHONES jack of the front panel.
2 Press the OUTPUT button to play the sound over the
headphones only.
OUTPUT
• The output to the speaker and pre-out jacks is turned off
and no sound is produced from the speakers.
Caution: Switching off the power of the unit and the unit will
cancel the settings.
[3] Turning the sound off temporarily (MUTING)
1 Use this to turn off the audio output
temporarily.
Press the MUTING button.
Cancelling MUTING mode.
Press the MUTING button again.
44
BASS TREBLE
SELECT
(Main unit)
PHONES
1
TV/ 0
+10
VCR
2
TEST
SPEAKER OUTPUT
TONE
SURROUND
DOLBY/DTS DSP 5CH / 7CH
STEREO
SURROUND SIMU.
MUTING
(Remote control unit)
NOTE:
To prevent hearing loss, do not raise the volume level excessively
when using headphones.
+
SKIP
-
SKIP
TUNER
1
TUNING
+
ENTER
-
SHIFT
MUTING
1
PHONO CD
2 3