Last Function Memory; Initialization Of The Microprocessor; Recalling Preset Stations - Denon AVR-3801 Operating Instructions Manual

Recalling preset stations

• To call out preset stations from the remote control unit.
1
ENTER
SHIFT
(Remote control unit)
2
CHANNEL
+
SKIP
-
SKIP
(Remote control unit)
• Calling out preset stations from the main unit's panel.
1
TUNING
PRESET
(Main unit)
2
FUNCTION
(Main unit)

13 LAST FUNCTION MEMORY

• This unit is equipped with a last function memory which stores the input and output setting conditions as they were immediately before the
power is switched off.
This function eliminates the need to perform complicated resettings when the power is switched on.
• The unit is also equipped with a back-up memory. This function provides approximately one week of memory storage when the main unit's
power switch is off and with the power cord disconnected.

14 INITIALIZATION OF THE MICROPROCESSOR

When the indication of the display is not normal or when the operation of the unit does not shows the reasonable result, the initialization of the
microprocessor is required by the following procedure.
1
Switch off the unit and remove the AC cord from the wall
outlet.
2
Hold the following AUTO button and PCM button, and plug
the AC cord into the outlet.
3
Check that the entire display is flashing with an interval of
about 1 second, and release your fingers from the 2 buttons
and the microprocessor will be initialized.
60
Watching the display, press the
SHIFT button to select the preset
memory block.
Watching the display, press the
CHANNEL + (UP) or – (DOWN)
button to select the desired preset
channel.
Press the TUNING PRESET button.
Turn the FUNCTION knob and
select the desired station.
TV
VCR DBS/CABLE
DISPLAY
SURR.
PARA.
SETUP
BAND
CHANNEL
+
SKIP
2
-
SKIP
TUNER
NOTES:
• If step 3 does not work, start over from step 1.
• If the microprocessor has been reset, all the button settings are
reset to the default values (the values set upon shipment from
the factory).
CD CDR/MD/ TAPE RECEIVER
VDP DVD
MENU
OSD
RETURN
TUNING
A/B
MEMORY
MODE
VOLUME
TUNING
+
ENTER
1
-
SHIFT
MUTING
PHONO CD