Denon AVR-3801 Operating Instructions Manual page 55

DSP surround simulation
• To operate the surround mode and surround parameters from the remote control unit.
1 Select the surround mode for the input channel.
The surround mode switches in the following order each time
the DSP SIMULATION button is pressed:
WIDE SCREEN
MATRIX
2
SURR.
PARA.
(Remote control unit)
3
TUNING
BAND MODE
TUNING
(Remote control unit)
4
SURR.
PARA.
(Remote control unit)
NOTES:
• The surround speaker setting can also be changed with the SPEAKER button on the remote control unit.
• When "Default" is selected and the
SIZE" is set to "medium", "EFFECT LEVEL" to "10" and "DELAY TIME" to "30ms".
• The "ROOM SIZE" expresses the expansion effect for the different surround modes in terms of the size of the sound field, not the actual
size of the listening room.
54
SURROUND
DOLBY/DTS DSP 5CH / 7CH
SURROUND SIMU. STEREO
6.1 / 7.1
DIRECT STEREO
SURROUND
(Remote control unit)
MONO MOVIE ROCK ARENA
VIDEO GAME JAZZ CLUB
Display the surround parameter screen on the monitor.
The screen for the selected surround mode appears.
Set the parameters.
TUNING
BAND MODE
TUNING
To end the setting mode, press the surround parameter button again.
courser button is pressed, "CINEMA EQ." and "D.COMP." are automatically turned off, "ROOM
F
VCR DBS/CABLE VDP DVD
DISPLAY MENU
2, 4
SURR.
OSD
PARA.
SETUP RETURN
TUNING
A/B
3
MEMORY
BAND MODE
CHANNEL VOLUME
TUNING
+
+
SKIP
ENTER
-
-
SHIFT
SKIP
MUTING
TUNER PHONO CD
1 2 3
CDR/ TAPE VDP DVD
4 5 6
VCR-1 VCR-2 /V.AUX
TV/DBS
7 8 9
TV/ 0
+10
VCR
TEST
SPEAKER OUTPUT
TONE
SURROUND
1
DOLBY/DTS DSP 5CH / 7CH
SIMU. STEREO
SURROUND
6.1 / 7.1
STEREO
DIRECT
SURROUND