Specifications; Remote Control Unit - Denon AVR-3801 Operating Instructions Manual

Denon av surround receiver operating instructions avr-3801
Hide thumbs Also See for AVR-3801:
Table of Contents

Advertisement

17 SPECIFICATIONS

Audio section
2
• Power amplifier
Rated output:
Dynamic power:
Output terminals:
• Analog
Input sensitivity / input impedance:
Frequency response:
S/N:
Distortion:
Rated output:
• Digital
D/A output:
Digital input:
• Phono equalizer (PHONO input — REC OUT)
Input sensitivity:
RIAA deviation:
Signal-to-noise ratio:
Rated output / Maximum output:
Distortion factor:
Video section
2
• Standard video jacks
Input / output level and impedance:
Frequency response:
• S-video jacks
Input / output level and impedance:
Frequency response:
• Color component video jacks
Input / output level and impedance:
Frequency response:
Tuner section
2
Reseiving Range:
Usable Sensitivity:
50 dB Quieting Sensitivity:
S/N (IHF-A):
Total Harmonic Distortion (at 1 kHz):
General
2
Powr supply:
Power consumption:
Maximum external dimensions:
Weight:
Remote control unit (RC-883)
2
Batteries:
External dimensions:
Weight:
*
For purposes of improvement, specifications and design are subject to change without notice.
70
105 W + 105 W (8 Ω/ohms, 20 Hz ~ 20 kHz with 0.05% T.H.D.)
Front:
150 W + 150 W (6 Ω/ohms, 1 kHz with 0.7% T.H.D.)
Center:
105 W
150 W
105 W + 105 W (8 Ω/ohms, 20 Hz ~ 20 kHz with 0.05% T.H.D.)
Surround:
150 W + 150 W (6 Ω/ohms, 1 kHz with 0.7% T.H.D.)
Surround Back: 105 W + 105 W (8 Ω/ohms, 20 Hz ~ 20 kHz with 0.05% T.H.D.)
150 W + 150 W (6 Ω/ohms, 1 kHz with 0.7% T.H.D.)
(8 Ω/ohms)
140 W x 2 ch
(4 Ω/ohms)
210 W x 2 ch
(2 Ω/ohms)
240 W x 2 ch
Front, Center, Surr. Back/Multi Zone:
Surround:
A or B
A + B
200 mV / 47 kΩ/kohms
10 Hz ~ 100 kHz: +0, –3 dB (DIRECT mode)
102 dB (DIRECT mode)
0.005% (20 Hz ~ 20 kHz) (DIRECT mode)
1.2 V
Rated output — 2 V (at 0 dB playback)
Total harmonic distortion — 0.008% (1 kHz, at 0 dB)
S/N ratio — 102 dB
Dynamic range — 96 dB
Format — Digital audio interface
2.5 mV
±1 dB (20 Hz to 20 kHz)
74 dB (A weighting, with 5 mV input)
150 mV / 8 V
0.03% (1 kHz, 3 V)
1 Vp-p, 75 Ω/ohms
5 Hz ~ 10 MHz — +0, –3 dB
Y (brightness) signal — 1 Vp-p, 75 Ω/ohms
C (color) signal — 0.286 Vp-p, 75 Ω/ohms
5 Hz ~ 10 MHz — +0, –3 dB
Y (brightness) signal — 1 Vp-p, 75 Ω/ohms
(blue) signal — 0.7 Vp-p, 75 Ω/ohms
C
B
(red) signal — 0.7Vp-p, 75 Ω/ohms
C
R
5 Hz ~ 27 MHz — +0, –3 dB
[FM] (note: µV at 75 Ω/ohms, 0 dBf=1 x 10
87.50 MHz ~ 107.90 MHz
1.0 µV (11.2 dBf)
MONO
1.6 µV (15.3 dBf)
STEREO
23 µV (38.5 dBf)
MONO
80 dB
STEREO
75 dB
MONO
0.15%
STEREO
0.3%
AC 120 V, 60 Hz
7.0 A
2 W Max (Standby)
434 (W) x 171 (H) x 416 (D) mm (17-3/32" x 6-11/32" x 16-3/8")
17.0 kg (37 lbs 8 oz)
R6P/AA Type (three batteries)
61 (W) x 230 (H) x 34 (D) mm (2-13/32" x 9-1/16" x 1-11/32")
200 g (Approx. 7 oz) (including batteries)
(8 Ω/ohms, 20 Hz ~ 20 kHz with 0.05% T.H.D.)
(6 Ω/ohms, 1 kHz with 0.7% T.H.D.)
6 ~ 16 Ω/ohms
6 ~ 16 Ω/ohms
8 ~ 16 Ω/ohms
W)
[AM]
–15
520 kHz ~ 1710 kHz
18 µV

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Avr-3802

Table of Contents