Delta Electronics A10 User Manual page 94

In order to perform simulation operation more conveniently, the Address of Control Block is set to
Internal Memory $0. Please refer to Fig. 2.8.33 shown below.
Fig. 2.8.34 is an example of starting screen. Besides using internal memory address (RCPG and
RCPNO), the user also can enter into Configuration dialog box and change the address value of recipe
register directly. No matter what kind of method is chosen, the user still needs to execute recipe read
and write operation via Control Block. Pressing Internal Memory button is to switch the recipe data by
using internal memory address and pressing Control Block button is to switch the recipe data through
the settings of the Control Block.
Revision Apr. 30th, 2007, 2007PDD23000002
Chapter 2 Creating and Editing Screens|ScrEdit Software User Manual
Fig. 2.8.32
Fig. 2.8.33
2-83