Delta Electronics A10 User Manual page 326

Appendix C Main Menu Operation of HMI System|ScrEdit Software User Manual
Revision Apr. 30th, 2007, 2007PDD23000002
System Parameter Settings:
It is used to set system parameter and communication settings.
System Parameters
Buzzer ON/OFF
ScreenSaver Time(Min)
Boot Delay Times(Sec)
Default Language(ID)
Print Interface
Communication Parameters
It is used to set communication parameters of each COM port.
Set if Buzzer works or not.
Set how long it waits before going into
screensaver after HMI is used. The unit is
minute.
Set how long it delays before enabling HMI
program after the power is in connected to
HMI. The unit is seconds.
Set the default language when multi-language
function is used.
Set the connecting print interface. It can be
USB or Parallel Port.
C-7