Macro Type; Choosing Macro Command From Menu Bar - Delta Electronics A10 User Manual

Chapter 4 Macro Function|ScrEdit Software User Manual
4.1

Macro Type

Delta DOP series HMI provides eleven kinds of macro commands and they are divided into four categories.
Please refer to the following:
1. Element ON / OFF Macro: It is provided for each Bit element that can be input, such as button element,
i.e. Maintained and Momentary button.
2. Before / After Execute Macro: It is provided for all elements, such as numeric /
and all button elements (including system button).
3. Screen Open / Close / Cycle Macro: Use screen as a unit. Each screen has an individual screen macro.
4. Initial / Background / Clock / Sub Macro: Use system as a unit. Each project, i.e. each program, has its
individual screen macro.
Macro Name
On Macro
Off Macro
Before Execute Macro
After Execute Macro
Screen Open Macro
Screen Close Macro
Screen Cycle Macro
Initial Macro
Background Macro
Clock Macro
Sub-macro
4-2
Fig. 4.1.1 Choosing Macro command from menu bar
Numbers
1 The user can have an ON Macro for each specific button.
1 The user can have an OFF Macro for each specific button.
For all button elements and numeric / character entry element. One
1
element has one before execute macro.
For all button elements and numeric / character entry element. One
1
element has one after execute macro.
There is a screen open macro for each screen. Therefore, there are n
1
screen open macros for n screen.
There is a screen close macro for each screen. Therefore, there are n
1
screen close macros for n screen.
There is a screen cycle macro for each screen. Therefore, there are n
1
screen cycle macros for n screen
1 There is only an initial Macro in a program.
1 There is only an background Macro in a program.
1 There is only an clock Macro in a program.
512 There are only 512 sub-macros for a program.
Table 4.1.1 Macro command table
c
haracter entry element
Remark
Revision Apr. 30th, 2007, 2007PDD23000002