Delta Electronics A10 User Manual page 115

Chapter 2 Creating and Editing Screens|ScrEdit Software User Manual
Alarm Setup Dialog Box
Number of
Records in
History Buffer
Non-volatile
Alarm Property
Setup
Delete
Modify
Import
Export
OK
2-104
Use this option to save data in order. When the number of records
exceeds this setting value, it will delete the records from the first record
and insert the new record again.
Using this option can enable to save data in SRAM when the power is
turned off. The capacity for saving alarm data of DOP-AS series is
4KBytes, DOP-A series is 8KBytes and DOP-AE series is 16KBytes.
(The power of SRAM is battery when the power is turned off.) (In some
HMI models, the user can save data in USB flash drive or SM card when
the power is turned off and the capacity for saving alarm data depends
on the capacity of USB flash drive or SM card.)
The user can double click a row of the alarm message contents table to
edit the alarm property.
(Please note that there are three languages tabs in Alarm Setup
dialog box since multi-language function is also supported here.
The user can click the tab to edit the alarm message contents
according to the user's requirement.)
The following Alarm Property Setup dialog box will display after double
clicking the row.
Message Display message when an alarm occurs.
Color Display message color when an alarm occurs.
Trigger Use this option to determine if the Bit is On or Off when an
Mode alarm occurs.
Screen Display screen when an alarm occurs.
Delete the alarm message contents.
Modify the alarm message contents. The user also can double click the
mouse to perform this function.
Import the Alarm Describe File into the alarm message contents table.
Export the alarm message contents from HMI and convert them to be a
Alarm Describe File.
Compete the settings and exit the Alarm Setup dialog box.
Revision Apr. 30th, 2007, 2007PDD23000002