Chapter 2 Creating and Editing Screens|ScrEdit Software User Manual
When ScrEdit is activated for the first time, the first window to show up is as follows. There are only File (F),
View(V), Option(O) and Help(H) on the toolbar.
2.
After pressing
shown in the following. (Fig. 2.2.4)
3.
Enter the Project Name, Screen Name, Screen No. and select connected HMI, controller or printer.
Then, click OK. It can create a new project in ScrEdit as shown in the following. (Fig. 2.2.5)
2-6
Fig. 2.2.3 Screen without editing file
or click File > New, it can create a new project and you will get a dialog box as
Fig. 2.2.4 Creating a New project
Revision Apr. 30th, 2007, 2007PDD23000002