Delta Electronics A10 User Manual page 72

Function
Sub-screen Check the
Setting check box next
to "This screen
is a sub-
screen"
Width
Height
Sub-screen
Position
Title Bar
Cycle Macro Delay Time
Fast Refresh Rate
Revision Apr. 30th, 2007, 2007PDD23000002
Chapter 2 Creating and Editing Screens|ScrEdit Software User Manual
The check box next to "This screen is a sub-screen" can be checked only
when General View Screen option is selected. Therefore, before setting
sub-screen function, please ensure General View Screen option is
selected.
It is used to set the width of sub-screen and the unit is Pixel.
It is used to set the height of sub-screen and the unit is Pixel.
The user can decide if the sub-screen is shown on the center position of
HMI display or specify the display position freely. Only input the coordinate
value directly (X and Y axis) or press the mouse button
sub-screen to the position the user decided (Fig. 2.7.17).
When the check box next to "Use Title Bar" is checked, the title bar will be
shown when opening sub-screen.
It is used to set Cycle Macro Delay Time when this screen is executed
every time. The range of the cycle macro delay time is within 100ms ~ 5s.
There are three levels of the Fast Refresh Rate and they are High, Medium
and Low. The purpose of this function is used to make some elements be
displayed immediately when switching screens. Please note that this
function is designed to provide fast value refresh speed for the element
which performs communication frequently. Therefore, it only allows four
elements that can be renewed immediately in each screen. If the user uses
this function on too many elements, it may affect the normal speed of HMI
operation. So, we recommend the user not to activate this function if not
necessary.
Description
Fig. 2.7.16 Sub-screen setting
Fig. 2.7.17 Sub-screen position
to drag the
2-61