Delta Electronics A10 User Manual page 73

Chapter 2 Creating and Editing Screens|ScrEdit Software User Manual
Function
Hard Copy Setting
Region
Top-Left
Right-Bottom
Base Screen Check the check
box next to
"Need a base
screen"
2-62
The user can find this function only in DOP series HMI which supports
printer function. If the user wants to enable this function, setting the printer
in advance is necessary. Please go to Option > Configuration > Print
(Fig. 2.7.15) and select the printer first. When this function is enabled, if
one report list button is created and its assigned output device is a printer,
once the user presses the report list button, HMI will refer to the setting in
Hard Copy Region option and execute the screen-printing.
It is used to set the region of HMI printing area (also called Hard Copy
Region) and the unit is Pixel.
Every screen can specify any one of the editing screens as a base screen.
When the check box next to "Need a base screen" is checked, the base
screen will be moved to the back (behind all other elements) as a ground
picture. After compile operation is completed and the screen data is
downloaded to HMI, HMI will execute all of the elements on the base
screen correctly.
Description
Revision Apr. 30th, 2007, 2007PDD23000002