Delta Electronics A10 User Manual page 215

Chapter 3 Element Function|ScrEdit Software User Manual
Property Description of Scale Graphic Element
Style
Main Scale
Display Mark
Detail Setup
Grid Color
3-78
Standard
Please refer to the figures below:
When main scale number is set to 2
It is used to determine if the scale value display next to the scale or not.
Date Length There are 16bits Word and 32bits Double Word two options.
Data Format There are following data format provided:
1. BCD
2. Signed Decimal
3. Unsigned Decimal
Minimum The user can set the minimum and maximum of input setting value
to determine the range of input setting value.
Maximum
Integral Digits Use this option to determine the digit number of integer and decimal
fraction. The digit number is not a real digit number value. It is only
Fractional Digits
the display format. The digit number will be a real decimal number
only when the data format is selected as "Floating".
When the user have input the minimum and maximum value, after pressing OK
button, HMI will examine the value by referring to the selected data length, data
format, integral and fractional digits.
It is used to set the grid color of the scale graphic element.
Rotation 90 Rotation 180
When main scale number is set to 3
Word/Double Word
Revision Apr. 30th, 2007, 2007PDD23000002
Rotation 270