Delta Electronics A10 User Manual page 107

Chapter 2 Creating and Editing Screens|ScrEdit Software User Manual
Interface It is used to set printer interface. The user can specify the communication port of the
printer. There are Parallel Port and USB two options. If Parallel Port is selected, the
optional printer module, DOP-EXPM110 is needed.
Auto Next Page When the "Auto Next Page" option is selected, the printer will print the next page
automatically. If the checkbox next to "Auto Next Page" is not checked, the printer
will print continuously without breaking for different pages.
Direction It is used to set printing direction (orientation). There are Vertical (Portrait) and
Horizontal (Landscape) two options.
Default tab in Configuration option
System Default Start up Screen
Value
Default Format
Default Screen
System Error Display
Time
System Key Use
Mode
Element Default Element Font Size
Value
Element Font Name It is used to specify the default element font name when
2-96
Table 2.9.4 Default Tab
Use this option to set the first display screen when HMI is
powered on and started up.
When creating elements, it is used to set the default value
format.
When a new editing screen is created, the user can use this
option to set the default screen background color.
Use this option to set the display time of system error
message dialog box. The range is within 0 ~ 5 seconds.
Please note that if the setting value is set to 0, it indicates
that the system error message dialog box will not display
on HMI screen.
It is used to set the system key action when the user presses
the key. There are Disable, Check Password and
Unchecked Password three options.
It is used to specify the default element font size when
creating an element.
creating an element.
Revision Apr. 30th, 2007, 2007PDD23000002