Delta Electronics A10 User Manual page 109

Chapter 2 Creating and Editing Screens|ScrEdit Software User Manual
Other tab in Configuration option
Read Controller Address 2. If this option is not selected, the screen saver will be
Transition time
When screen saver ends 1. Return Original: Return to the original screen at that
Multi-Language New
Enable/Disable
Remove
Modify
2-98
enabled automatically when the Screen Saver Time
set in HMI is reached. Please refer to the figure
below. If the screen saver function is enabled, the
user can touch the HMI screen to disable it. If the
Screen Saver Time is set, but the user does not
choose the screen saver, the screen will become
black when the screen saver function is enabled.
This option can set the transition time between two screen
savers. The range is within 1 ~ 255 second.
time when the screen saver is enabled.
2. Choose screen: Specify the screen that will show after
the screen saver program ends.
Pressing New button can add a language option.
As shown as the figure above, the user has to enter the
language name and setting value. The setting value will
be referred by the system when setting multi-language.
The range of the setting value is within 0 ~ 255. Setting
language name is easy for text editing. The user can
press button to change the flag color on the language
name tab.
Delta HMI allows the user to edit multi-language screen,
however the user can use this option to determine which
languages are supported (enabled) or not supported
(disabled) as the user wishes when downloading data to
HMI.
Remove the existing language. Keep at least one
language for a project.
Modify the existing language name and setting value.
Revision Apr. 30th, 2007, 2007PDD23000002