Delta Electronics A10 User Manual page 81

Chapter 2 Creating and Editing Screens|ScrEdit Software User Manual
Recipe Setup
Input
Open
Save
Reset
Clear
2-70
The user can load recipe data by clicking
data do not contain the starting address of recipe data. Therefore, regardless of
which brand of the controller connecting to HMI, they all can use the same recipe
file. There are two recipe file types provided in Delta DOP series HMI, one is
16bits recipe file (*.rcp) and the other is 32 bits recipe file (*.csv) that can be
opened in Windows® Excel environment. Please pay close attention to the format
of recipe file and make sure that the recipe file is a 16 bits data or a 32 bits data.
Do not select the incorrect data format; otherwise the program will not work
normally.
It is used to save the editing recipe data to be a file. When saving recipe file, the
starting address will not be saved. This lets the user uses the same recipe file in
the different brand of the controller. The user also can save the recipe file as
16bits recipe file (*.rcp) and 32 bits recipe file (*.csv) that can be opened in
Windows® Excel environment.
When the user clicks
recipe data will be deleted. There is no other method to retrieve the recipe except
for using Import function to import the saved recipe data again.
All input recipe will be cleared to 0 (zero) when clear function is selected. Please
refer to Fig. 2.8.17 on next page.
Fig. 2.8.16
button. The loaded recipe
button, all related recipe setting and input
Revision Apr. 30th, 2007, 2007PDD23000002