Meter Element; Meter Element Options - Delta Electronics A10 User Manual

3.3

Meter Element

Property Description of Meter Element
The user can set meter appearance in the property table, such as the style, the color (including border color,
background color, stitch color, scale color) and the scale region number, etc. Also, the max. & min. value
and high & low limit can be defined in Detail Setup dialog box. It can be used to calculate the specified
address and measure if it exceeds the limit or not. The user can also use various colors to show clearly and
this is convenience for the user to recognize.
Read Address
Text / Text Size
Font / Text Color
Border Color
Background Color
Style
Detail Setup
Revision Apr. 30th, 2007, 2007PDD23000002
Chapter 3 Element Function|ScrEdit Software User Manual
Fig. 3.3.1 Meter element options
Table 3.3.1 Property Description of Meter Element
The address can be internal memory or the controller address. (Please refer to Table
3.2.2 Property Description of General Buttons.)
The user can set the text, text size, font and text color that provided by Windows®
to determine the text display on the element. (Please refer to Table 3.2.2 Property
Description of General Buttons.)
It is used to set the border color of meter element.
It is used to set the background color of meter element.
Standard Raised
Data There are 16bits Word and 32bits
Length Double Word two options.
Data There are following data format
Format provided:
Word/Double Word
1. BCD
2. Signed BCD
3. Signed Decimal
4. Unsigned Decimal
Minimum It is used to set the display minimum
Value and maximum value.
Maximum
Value
Sunken
3-19