Delta Electronics A10 User Manual page 184

Property Description of Numeric Entry Element
Leading Zero The following figures show the difference if the user selects the Leading Zero option.
(Please note that the integral digits are set to 4.)
Trigger The user can use this setting to trigger the designated controller address to be ON
before or after writing the setting value. Please note that this function can only trigger
Trigger Mode
the controller address to be ON. If the controller address needs to be triggered again,
the user should set the address to be OFF manually.
Detail
Date Length
Data Format
Edit System
Keypad
Revision Apr. 30th, 2007, 2007PDD23000002
Chapter 3 Element Function|ScrEdit Software User Manual
(If YES is selected, the numeric value will show as this one.)
(If NO is selected, the numeric value will show as this one.)
There are 16bits Word and 32bits Double Word two options.
There are following data format provided:
Word
1. BCD
2. Signed BCD
3. Signed Decimal
4. Unsigned Decimal
5. Hex
6. Binary
When the input mode is Touch Popup, the user can define the
style of the keypad, including title, font, font size, font color and
keypad color. The position that the system keypad cannot display
will be placed in the center of the screen.
Double Word
1. BCD
2. Signed BCD
3. Signed Decimal
4. Unsigned Decimal
5. Hex
6. Binary
7. Floating
3-47