Delta Electronics A10 User Manual page 152

Property Description of Goto Screen / Previous Page / Previous View Buttons
InterLock Address
InterLock Level
Before Execute Macro
After Execute Macro
System Function Button
Button Type
System Date Time
Password Table
Setup
Enter Password
Contrast
Brightness
Low Security
System Menu
Report List
Revision Apr. 30th, 2007, 2007PDD23000002
Chapter 3 Element Function|ScrEdit Software User Manual
When InterLock Address is set to be ON or OFF (this is determined by the property
of "InterLock Level"), this button can be enabled.
If this option is set, when the user presses the button, the system will execute the
command of this macro first and then perform the operation of this button. But, if
the state of the button is not triggered by pressing the button (via macro or external
signal), the command of this macro will not be executed.
If this option is set, when the user presses the button, the system will perform the
operation of this button first and then execute the command of this macro. But, if
the state of the button is not triggered by pressing the button (via macro or external
signal), the command of this macro will not be executed.
Fig. 3.2.5 System function button options
Table 3.2.8 System function buttons
Macro Read Write
It is used to set HMI system time and date (year-month-day,
No No No
hours:minutes:seconds)
No No No It is used to set all password priority.
No No No HMI provides passwords function.
No No No It is used to adjust HMI contrast and brightness.
After pressing this button, HMI will set the current priority to be
No No No
the lowest level (the lowest level is 0).
After pressing this button, HMI will change screen to system
No No No
menu.
After pressing this button, HMI will output the screen data to
No No No
the specific device. It is usually used with print function.
Function
3-15