FUTABA 12Z Series Instruction Manual page 88

CAMBER MIX
This function adjusts the AFR (D/R) rate
of camber operation which operates the wing
camber (ailerons, camber flaps, brake flaps) in
the negative and positive directions. The aileron,
flap, and elevator rates can also be adjusted
independently by curve, and attitude changes
caused by camber operation can be corrected.
*Initial setting assigns camber operation to side lever LS.
the mixing direction is reversed by the linkage,
adjustments can be made by changing the
mixing rate polarity (+ or -).
menu and call the setup screen
shown below by pushing the enter
button.
[Return Key]
setting
adjustment
88 <Model Menu (Airplane/Glider Functions)>
(Currently selected condition name)
cut switch
*For a description of the curve setting method, see the
description at the back of this manual.
*The display screen is an example. The actual
screen depends on the model type.
be set.
(For a description of the setting method, refer to
the AFR function.)
PUSH
(For a description of the setting
method, see the description at
the back of this manual.)
[Cursor Lever]
[Data Input Dial]
[Enter Button]