FUTABA 12Z Series Instruction Manual page 17

CF Card CFDP32M (Optional)
The T12Z transmitter model data can be stored
by using an optional CF (Compact Flash) card.
When T12Z transmitter software update software
is released, the software is updated using a CF
card. CF card memory size is 32MB.
Warning
Be sure to turn off the power to the transmitter
before inserting or removing the CF card.
As the CF card is a precision device, do not use
excessive force when inserting.
Be sure to use only Futaba's original CF card,
CFDP32M, for the T12Z transmitter.
* Futaba does not recommend any CF cards other than
Futaba's original CF cards.
Inserting/removing the CF card
1. Turn off the transmitter power and then open
the cover (rubber) at the left side of the
transmitter.
2.
[Inserting the card]
*Turn the CF card so that the front of the card faces the back
of the transmitter and slide the card into the card slot.
*Push in the card until it touches bottom. At the same time,
[Removing the card]
and can be removed.
3. Close the cover (rubber).
Read data from a PC
Saving model data and update files (released
from Futaba) into the CF card, you can use those
files on your T12Z transmitter. Equipment for
reading and writing CF cards are available at most
electronics stores.
[Important]: Before saving data from the PC,
insert the CF card into the transmitter and
from the PC, copy the file to the "MODEL"
folder, which is automatically written.
*Use only CF card reader/writer that complies with CFA
(CompactFlashTM Association) standard.
Stored data
The life of the CF card is limited due to the use
of Flash memory. When you have a problem of
saving or reading data such as picture data after a
long period of use, please get a new CF card.
*We do not have the responsibility of compensating any
failure or damage to the data stored in the memory card no
matter what the reason is. Be sure to keep the backup of
your important data in your CF card.
*No necessity for backup; T12Z transmitters and CF cards
are using nonvolatile memory devices so that the data
stored in those will not be lost, even when the main battery
is removed.
<Before Use> 17