Table of Contents
Advertisement
Chapter 3
Installing the Clean Access Manager and Clean Access Server
If the country contains more than one time zone, the time zones for the country appears.
c.
Choose the appropriate time zone region from the list, such as
d.
Confirm your choices by entering
e.
The following information has been given:
Is the above information OK?
1) Yes
2) No
#? 1
Type and confirm the current date and time, using format hh:mm:ss mm/dd/yy.
Step 13
Current date and time hh:mm:ss mm/dd/yy [11:53:12 08/22/08]: 11:53:12 08/22/08
You entered 11:53:12 08/22/08 Is this correct? (y/n)? [y] y
Follow the prompts to configure the temporary SSL security certificate that enables secure connections
Step 14
between the CAM and the administrator web console as follows:
a.
Type the IP address or domain name for which you want the certificate to be issued, or press enter
to accept the default IP address (typically the eth0 IP address you already specified, for example
10.201.240.11
Note
For the organization unit name, enter the group within your organization that is responsible for the
b.
certificate (for example,
For the organization name, type the name of your organization or company for which you would
c.
like to receive the certificate (for example,
Type the name of the city or county in which your organization is legally located (for example,
d.
Jose
e.
Type the two-character state code in which the organization is located (for example,
press Enter.
f.
Type the two-letter country code (for example,
Step 15
Confirm values and press Enter to generate the SSL certificate or type
You entered the following:
Domain: 10.201.240.11
Organization unit: DOC
Organization name: Cisco Systems
City name: San Jose
State code: CA
Country code: US
Is this correct? (y/n)? [y] y
You must generate the temporary SSL certificate or you will not be able to access the CAM web console.
Note
Specify whether or not you want the CAM to feature Pre-login Banner Support at the following prompt.
Step 16
Enable Prelogin Banner Support? (y/n)? [n]
For more information and an example of the Pre-login Banner feature, see
OL-20326-01
United States
Pacific Time
).
This is also the IP address or domain name to which the web server responds. If DNS is not
already set up for a domain name, the CAM web console will not load. Make sure to create
a DNS entry in your servers, or else use an IP address for the CAM.
).
DOC
), and press Enter.
, or use
to cancel and start over.
1
2
), and press Enter.
Cisco Systems
), and press Enter.
US
Cisco NAC Appliance Hardware Installation Guide
Installing the Clean Access Manager
for Pacific Time, and press Enter.
21
or
CA
to restart.
n
Figure 3-2 on page
San
), and
NY
3-14.
3-9
Hide quick links:
Advertisement
Table of Contents
