Safety With Equipment; Safety With Electricity - Cisco NAC3350-PROF-K9 - NAC Profiler Server Installation Manual

Chapter 2 Preparing for Installation
•
•
•
•
•
•

Safety with Equipment

The following guidelines will help ensure your safety and protect the equipment. However, this list does
not include all potentially hazardous situations, so be alert.
Warning Read the installation instructions before connecting the system to the power source. Statement 1004
•
•
•
•
•
•
•
•

Safety with Electricity

This unit is intended for installation in restricted access areas. A restricted access area can be
Warning
accessed only through the use of a special tool, lock and key, or other means of security.
Statement 1017
OL-20326-01
To help prevent electric shock, plug the appliance and power cables into properly grounded
electrical outlets. These cables are equipped with three-prong plugs to help ensure proper
grounding. Do not use adapter plugs or remove the grounding prong from a cable. If you must use
an extension cord, use a three-wire cord with properly grounded plugs.
Observe extension cord and power strip ratings. Make sure that the total ampere rating of all
products plugged into the extension cord or power strip does not exceed 80 percent of the extension
cord or power strip ampere ratings limit.
Do not use appliance, or voltage converters, or kits sold for appliances with your product.
To help protect your appliance from sudden, transient increases and decreases in electrical power,
use a surge suppressor, line conditioner, or uninterruptible power supply (UPS).
Position cables and power cords carefully; route cables and the power cord and plug so that they
cannot be stepped on or tripped over. Be sure that nothing rests on your appliance cables or
power cord.
Do not modify power cables or plugs. Consult a licensed electrician or your power company for site
modifications. Always follow your local or national wiring rules.
Always disconnect all power cords and interface cables before moving the appliance.
Never assume that power is disconnected from a circuit; always check.
Keep the appliance chassis area clear and dust-free before and after installation.
Keep tools and assembly components away from walk areas where you or others could trip
over them.
Do not work alone if potentially hazardous conditions exist.
Do not perform any action that creates a potential hazard to people or makes the equipment unsafe.
Do not wear loose clothing that may get caught in the appliance chassis.
Wear safety glasses when working under conditions that may be hazardous to your eyes.
Cisco NAC Appliance Hardware Installation Guide
Safety Guidelines
2-3