Cisco NAC3350-PROF-K9 - NAC Profiler Server Installation Manual page 133

Chapter 4 Configuring High Availability (HA)
If using a CA-signed certificate for the HA pair:
Click Browse and navigate to the location on your local machine where you have saved the
a.
CA-signed certificate you received from your Certificate Authority and the associated Private Key
you exported from the HA-Primary CAS and saved to your local machine.
Select the CA-signed certificate file and click Import.
b.
Repeat the process to import the Private Key.
c.
For more information, see the "Manage CAM SSL Certificates" section of the
Clean Access Manager Configuration Guide, Release
Go to the Administration > CCA Manager > Network and change the IP Address of the secondary
Step 4
CAM to an address that is different from the HA-Primary CAM IP address and the Service IP address
(such as x
Figure 4-6
Set the Host Name value to the same value set for the Peer Host Name in the HA-Primary CAM
Step 5
configuration. See
Note
Choose HA-Secondary in the Clean Access Manager Mode dropdown menu. The high availability
Step 6
settings appear.
Set the Service IP Address value to the same value set for the Service IP Address in the HA-Primary
Step 7
CAM configuration.
OL-20326-01
x x ).
. . .122
HA-Secondary Clean Access Manager Failover Settings
Figure 4-4 on page
The Host Name and Peer Host Name fields are case-sensitive. Make sure to match what is typed
here with what was typed for the HA-Primary CAM.
Installing a Clean Access Manager High Availability Pair
4.8(3).
4-6.
Cisco NAC Appliance Hardware Installation Guide
Cisco NAC Appliance -
4-13