Cisco NAC3350-PROF-K9 - NAC Profiler Server Installation Manual page 168

Recovering Root Password for CAM/CAS
Power cycle the machine.
Step 2
After power-cycling, the GUI mode displays. Press Ctrl-x to switch to text mode. This displays a "boot:"
Step 3
prompt.
At the prompt type:
Step 4
Type:
Step 5
passwd
Change the password.
Step 6
Reboot the machine using the
Step 7
Cisco NAC Appliance Hardware Installation Guide
5-2
. This boots the machine into single user mode.
linux single
.
command.
reboot
Chapter 5 Password Recovery
OL-20326-01