Backplane Jumper Settings - Dell PowerEdge C2100 Hardware Owner's Manual

Table 5-1. System Configuration Jumpers
Jumper
JP2
NOTE:
The "*" in the table of system configuration jumpers describes the default
status and the default state is not active state.

Backplane Jumper Settings

CAUTION:
You should only perform troubleshooting and simple repairs as authorized in
your product documentation, or as directed by the online or telephone service
and support team. Damage due to servicing that is not authorized by Dell is not
covered by your warranty. Read and follow the safety instructions that came
with the product.
Figure 5-2. 3.5" Hard-Drive Expander Backplane
The function of the jumper installed on the expander backplane is shown
below.
Table 5-2. Jumper Installed on Backplane
Jumper
J15
126
Jumpers and Connectors
Function
iBMC Disable
Many repairs may only be done by a certified service technician.
Function
RAID Card setting
Off
*Disable
Off
LSI Series
On
Enable
On
PERC Series