Installing Rpcs Printer Driver - Ricoh Priport DX 4640PD Printer Reference

H
Follow the instructions on the screen.
A message prompting you to restart your computer may appear. To complete
installation, restart your computer.
Important
❒ If the printer has options installed, you should make settings for them us-
ing the printer driver. See p.32 "Setting Up Options - RPCS".
Note
❒ If you want to change the printer name, follow the procedure below:
• Windows 95/98/Me/2000, and Windows NT 4.0
On the [Start] menu, point to [Settings], and then click [Printers]. The
[Printers] window appears. Right-click the printer icon, and then click
[Rename].
• Windows XP Professional and Windows Server 2003
On the [Start] menu, click [Printers and Faxes]. The [Printers and Faxes]
window appears. Right-click the printer icon, and then click [Rename].
• Windows XP Home Edition
On the [Start] menu, click[Control Panel]. Click [Printers and Other Hard-
ware], and then click [Printers and Faxes]. The [Printers and Faxes] window
appears. Right-click the printer icon, and then click [Rename].

Installing RPCS Printer Driver

This section gives basic instructions for installing the RPCS printer driver with-
out using Quick Install. Follow the procedures below, as appropriate.
Reference
See p.25 "Quick Install" to install the RPCS printer driver using Quick Install.
Limitation
❒ If your operating system is Windows 2000/XP, Windows Server 2003, or
Windows NT 4.0, installing a printer driver using Auto Run requires Admin-
istrator permission. When you install a printer driver using Auto Run, log on
using an account that has Administrator permission.
❒ SmartDeviceMonitor for Client, included on the CD-ROM, must be installed.
Important
❒ If your operating system is Windows NT 4.0, we recommend that you up-
grade the Windows NT 4.0 operating system to Service Pack 4 or later before
installing the printer drivers. Contact your Windows retailer for details about
latest versions.
Installing the Software
27
2