Ricoh Priport DX 4640PD Printer Reference page 14

Getting Started
C
Master Cycle
1
There is a belief pause between completion of the master and beginning the
print.
The machine briefly stops after master making, but does not pause between
printing and master making of the following page. When master making is
concluded, the machine pauses again before switching to print mode.
Press the {Start} on the control panel to begin printing.
Note
❒ Since it switches to the print mode when master making concludes, to pro-
ceed to the master making of the next page without printing the master
making page, press the [End Printing] on the display and conclude the print
mode.
D Master/Print Cycle
Operation stops briefly after each master making and print.
After printing, if further data remains waiting for master making, the printer
will switch back to the master making mode.
Press the {Start} on the control panel to start printing. It switches to the master
making mode with printing in the concluded state.
Press the {Start} key when the printer has stopped to resume master making
from the next page. If no further data remains, the printer will end the operation.
Note
❒ If further data remains waiting for master making, the printer will switch
to the master making mode at the end of the print. However, if you need
additional printing still need to execute additional print after the end of the
preceding print, switch the machine to the print mode, and then press the
{Start} key.
8
AJK174S
AJK173S