Ricoh Priport DX 4640PD Printer Reference page 36

Preparing to Print
❖ IPP
A
Click [IPP].
The [IPP Setting] dialog box appears.
B To specify the IP address of the printer, enter "http://machine's-ip-
address/printer" or "ipp://machine's-ip-address/printer" in the
[Printer URL] box.
(Example: IP address is 192.168.15.16)
2
http://192.168.15.16/printer
ipp://192.168.15.16/printer
C If necessary, enter the names to distinguish the printer in the [IPP Port
Name] box. Enter a different name to those of any existing port name.
If you do not do this, the address entered in the [Printer URL] box will
be set as the IPP port name.
D If a proxy server and IPP user name are used, click [&Detailed Settings],
and then configure the necessary settings.
Note
❒
E Click [OK].
J
Make sure the location for the selected printer appears after [Port:].
K
Configure the user code and default printer as necessary.
❖ User Code
User codes are eight digit codes that allow you to keep track of printing done
under each code. To use this feature, the network administrator should assign
user codes and inform users of them before they install the printer driver.
Use the following procedures to enter a user code for registration:
• For the PostScript3 printer driver, enter the user code on the [Job Log]
tab in the printer properties dialog box.
• For the RPCS printer driver, click the [Printer Configuration...] button on the
[Print Settings] tab in the [Printer Properties] dialog box. Click the [User Code...]
button. A dialog box appears. Enter the user code in the dialog box.
Note
❒ When using the RPCS printer driver on Windows 95/98/Me, the user code
cannot be changed once it is entered. To change an entered user code, un-
install the printer driver, reinstall it, and then enter a new user code.
Reference
For details, see Operating Instructions.
❖ Default Printer
Select the [Default Printer] check box to set the printer as the default printer.
L
Click [Continue] to start printer driver installation.
M
Follow the instructions on the screen.
30
For details, see SmartDeviceMonitor for Client Help.