Ricoh Priport DX 4640PD Printer Reference page 13

Selecting the Cycle Setting Mode
You can select an operation mode for master making and printing online.
A
Auto Cycle
Master making and printing are completed continuously.
If printing is suspended using the {Clear/Stop} on the control panel, it stops in
the print mode.
In this case, it is not possible to switch to the master making mode unless
printing is completed.
To resume master making from the next page, press the [End Printing] on the
display and terminate the printing operation.
B Original Page Cycle
Operations stop briefly after both master making and printing of each page
are performed.
After printing, if further data remains waiting for master making, the printer
switches back to master making mode. Press the {Start} key when the printer
has stopped to resume master making from the next page. If no further data
remains, the printer will end the operation.
Note
❒ If further data remains waiting for master making, the printer switches to
master making mode after making each print. However, if you need addi-
tional printing of the preceding original, switch the machine to print mode,
and then press the {Start} key.
AJK172S
AJK175S
Control Panel
1
7