Ricoh Priport DX 4640PD Printer Reference page 28

Preparing to Print
Interface Settings/IEEE 802.11b
Preparation
You must install the IEEE 802.11b interface unit into the printer.
Note
❒ Be sure to make all settings.
2
❖ Communication Mode
Specifies the communication mode of the wireless LAN.
• 802.11 Ad hoc
• Ad hoc
• Infrastructure
Note
❒ Default: 802.11 Ad hoc
❖ SSID Setting
Specifies SSID to distinguish the access point in infrastructure mode or 802.11
ad hoc mode.
Limitation
❒ The characters that can be used are ASCII 0x20-0x7e (32 bytes).
Note
❒ Default: blank (ASSID)
❒ If blank is specified in 802.11b ad hoc mode or ad hoc mode, "ASSID" ap-
pears.
❖ Channel
Specifies a channel when you select 802.11b ad hoc mode or ad hoc mode.
Note
❒ Default: 11
❒ The following channels are available:
• Metric version: 1-13
• Inch version: 1-11
22