Host Interface - Ricoh Priport DX 4640PD Printer Reference

PDF Menu
Displays the settings of PDF Resolution.

Host Interface

Displays the settings of I/O Buffer and I/O Timeout.
Network Setup
Displays the settings made under the Interface menu.
When DHCP is active on the network, the actual IP address, subnet mask and
gateway address appear in parentheses on the configuration page.
IEEE 802.11b
Displays the settings of IEEE 802.11b
Interface Information
Displays the interface information.
Host Interface
❖ I/O Buffer
Sets the capacity of the reception buffer.
Note
❒ Default: 128 KB
❖ I/O Timeout
Sets the time to enable the interface after data stops being received. When the
time set here is exceeded, the printer will not receive further data via the in-
terface.
Important
❒ If the set time is too short, a time out might occur while one data is being
received. As a result, data from another interface might cut in and be print-
ed, or the emulation retrieval might start to replace the emulation before
the data is completely received.
Note
❒ Default: 15 seconds
Online Print Features Settings
6
95