Ricoh Priport DX 4640PD Printer Reference page 47

Setting up the PPD file
Preparation
Make sure that the printer is connected to an AppleTalk network before per-
forming the following procedure:
A
On the Apple menu, click [Chooser].
B
Click the [Adobe PS] icon.
C
In the [Select a PostScript Printer:] list, click the name of the printer you want
to use.
D
Click [Setup].
E
Click [Select PPD...].
F
Click the printer description file you want to use, and then click [Select].
G
Click [OK].
The PPD file is set up, and the [Adobe PS] icon appears at the left of the printer
name in the list. Next, follow the procedure on p.41 "Setting up options" to
make the option settings, or close the [Chooser] dialog box.
Setting up options
A
On the Apple menu, click [Chooser].
B
Click the [Adobe PS] icon.
C
In the [Select a PostScript Printer:] list, click the name of the printer you want
to use, and then click [Setup...].
D
Click [Configure].
A list of options appears.
E
Select the option you want to set up, and then select the appropriate setting
for it.
Note
❒ If the option you want to set up is not displayed, the PPD file might not be
set up correctly. Check the name of the PPD file shown in the dialog box.
F
Click [OK].
The list of options closes.
G
Click [OK].
H
Close the [Chooser] dialog box.
Installing the Software
41
2