Ricoh Priport DX 4640PD Printer Reference page 35

I
Add the new port from SmartDeviceMonitor.
Selecting the port type
A Click [Port:], and then click [Add].
B Click [SmartDeviceMonitor], and then click [OK].
C Select the printer you want to use.
❖ TCP/IP
A Click [TCP/IP], and then click [&Search].
Available machines will be listed.
B Select the printer you want to use, and then click [OK].
Note
❒ Machines that respond to an IP broadcast from the computer will be
displayed. To print to a printer not listed here, click [Specify Address -
TCP/IP], and then enter the IP address or host name.
❒ Part of the printer's IP address is used for the port name. Under Win-
dows 95/98/Me, avoid using an address that is partially similar to
one already in use. For example , if "192.168.0.2" is already used,
"192.168.0.2xx" cannot be used. Similarly, if "192.168.0.20" is already
used, "192.168.0.2" cannot be used.
❖ NetBEUI
A Click [NetBEUI], and then click [&Search].
A list of machines that can be used with NetBEUI appears.
B
Select the printer you want to use, and then click [OK].
Note
❒ NetBEUI cannot be used under Windows XP or Windows Server 2003.
❒ Machines that respond to a broadcast from the computer will be dis-
played. To print to a printer not listed here, click [Specify Address -
TCP/IP], and then enter the NetBEUI address. Confirm the NetBEUI
address on the network is on the configuration page. The NetBEUI
address appears as "\\RNPxxxx\xxx" on the configuration page.
Enter the machine's network path name in the form of "%%Compu-
ter name\Share name". Do not enter "\\" but "%%" as head charac-
ters.
❒ You cannot print to machines beyond routers.
Installing the Software
29
2